Mike,
The winders have a 2.5 mm jack for a remote control. It seems that you
could do this on a wireless basis, if you could have the infrared
receiver actuate a relay, which would be wired to the remote jack, and
close the circuit. I have just wired up a 2.5 mm plug with 2-conducor
cable for the length desired, and connected the other end to a NO push
button. Not cordless, but very cheap!
Bill Stanke
Mike DiTullio wrote:
>
> All this talk about remotes for the md-1 makes me think: Has anybody come up
> with a cordless remove for the winder2 and their like? I was thinking of
> buying an inexpensive infrared remote kit and trying that out.
>
> ------------------------------------
> Mike DiTullio
> Lockheed Martin
> 609-272-2088
> mikedt@xxxxxxxxxxx
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|