Winder 1 is single shot only- unless you run a wire from the body of the camera
to the ring of the remote jack. Then it will fire continuously until you remove
the wire. Or put in a switch. I don't believe this will damage the winder, I
first read about it in "The Olympus Way" by Mannheim.
Steve Goss, Dallas Tx usa
P. S. It works on the winder 2 also.
Andrew Fildes wrote:
>
> Winder 2 gives you the choice of S - single shot or C - continuous firing.
> Winder 1 is single shot only.
> AndrewF
>
> >In a message dated 04/10/2001 4:05:45 PM Central Daylight Time,
> >frankrad4@xxxxxxxx writes:
> >
> >
> >
> >Olympus made a winder1 and
> >winder2 and a couple of motor drive units that can attach to your camera.
> >
> >
> >
> >
> >Whatsthe difference between winder 1 and winder 2 models?
> >
> >
> >
> >
> >Chet \\\0tO
> >97 XR250-GPS equipped
> >94 JT25
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|