Olympus-OM
[Top] [All Lists]

RE: [OM] Acer Scanwit -Slide Scan Quality

Subject: RE: [OM] Acer Scanwit -Slide Scan Quality
From: Jim Caldwell <jamesfc@xxxxxxx>
Date: Mon, 19 Mar 2001 10:16:37 -0500 (EST)
I have had real good luck with slides.  In the original reviews I've read, the 
claims are that the Scanwit does a much better job on negatives and rivals the 
expensive Nikon scanner.  Check out 
http://www.photoscientia.co.uk/Usingmira.htm - this page has some great 
information to set your black point for slides and how to improved scan 
quality.  Like any scanner, you need to optimize the scan settings for best 
results.

Jim C.

------Original Message------
From: "Clemente Colayco" <litefoot@xxxxxxxxxxxxxxx>
To: olympus@xxxxxxxxxxxxxxx
Sent: March 19, 2001 1:52:12 PM GMT
Subject: [OM] Acer Scanwit -Slide Scan Quality


Hi Jim

How is the quality when scanning slides? What resolution settings give
acceptable prints in 3R or 4R size?

Regards

Titoy

----- Original Message -----
From: Jim Caldwell <jamesfc@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, March 19, 2001 9:35 PM
Subject: RE: [OM] Acer Scanwit - another happy buyer


> I've been using the Scanwit for about six months now and I have two
scanners connected to the SCSI card supplied with the Scanwit.  This little
scanner does a really nice job!  I'm quite happy with mine - but beware of
those stupid plastic fingers that hold slides in place.  They will
eventually break off, but that doesn't hurt anything and the slide holder
works just fine without them!
>
> Jim C.
>
> ------Original Message------
> From: Jez.Cunningham@xxxxxxxxxx
> To: olympus@xxxxxxxxxxxxxxx
> Sent: March 19, 2001 9:59:59 AM GMT
> Subject: [OM] Acer Scanwit - another happy buyer
>
>
>
>
> Just for your info, I just bought a 2720s film scanner (Jessops UK, 299
ukp).  I was a little apprehensive after reading great reviews but some
problems with SCSI connections.  I already have an hp flatbed with a SCSI
card but hp had warned that it was not
> a full SCSI implementation.  And I was a bit worried about introducing a
second SCSI card into the PC.  So I plugged the Acer into the existing SCSI
chain (despite more apprehension about having to use an adaptor cable due to
different connector types
> being used) AND IT WORKED FIRST TIME.
>
> I've only had a couple of hours playing, but got great 10 by 8 prints from
my Epson 870 already.
>
> best regds
> jez
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
  • RE: [OM] Acer Scanwit -Slide Scan Quality, Jim Caldwell <=
Sponsored by Tako
Impressum | Datenschutz