Olympus-OM
[Top] [All Lists]

Re: [OM] light leak

Subject: Re: [OM] light leak
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Mon, 3 Apr 2000 10:44:15 -0400
Is the streaking found on film processed by a lab?

John  Hermanson
___________________________________
Camtech, Olympus Service since 1977.
21 South Ln.  Huntington NY 11743-4714
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: Jodi Jakeway <jjakeway@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Friday, March 31, 2000 9:19 PM
Subject: Re: [OM] light leak


> I use 2 Hewes stainless steel reels and  ss tank, and I make sure it's
very
> clean and dry before using.  I noticed that the film was held in very
tight
> along the slots of the reels when I first got it and was practicing with
old
> film.  Maybe I should try another reel.
> Lots of things to try.  Better do one at a time, huh?
> thanks
> Jodi
>
> ----- Original Message -----
> From: "Gregg" <giverson@xxxxxxxxxxxxx>
> To: <olympus@xxxxxxxxxxxxxxx>
> Sent: Friday, March 31, 2000 5:20 PM
> Subject: Re: [OM] light leak
>
>
> > I seem to remember getting the same effect if I developed film using a
> > plastic reel.  I thought at the time it was caused by a reel that was
> still
> > a little wet or something, resulting in the plastic adhering to the
film.
> > Consequently, no developer reached that area.
> >
> > Anyway, check out the development and agitation.  If it were the
changing
> > bag it seems that light would fall on the entire film not just the area
> near
> > the sprocket holes.
> >
> > Gregg
> >
> > From: "Jodi Jakeway
> > Subject: Re: [OM] light leak
> >
> >
> > > I do notice a slight flex to the camera back.  I use Kodak Tri-X and
> > Ilford
> > > HP5+ b&w and develop my own (at home I use D-76 developer, at school
> > Ilford
> > > ID-11).  Perhaps my changing bag has a leak, as two rolls I did at
> school
> > > have no marks.  Would a leak in the changing bag cause the
intermittent
> > > streaks along the sprocket holes?  It would seem I would get density
all
> > > over the images.
> >
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> >
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz