On Thu, Mar 25, 1999 at 12:12:38PM -0500, John Hermanson wrote:
> If your 10 is not working with a Winder 1 or 2 (NOT Motor Drive 1 or 2),
> then it is most likely the MD switch in the bottom of the camera is
> either dirty or out of adjustment. The switch does not need
> modification to work with a winder.
I've used a Motor Drive 1 on an OM-10...what doesn't work? (I didn't run it
in sequence mode for more than a couple of frames, though.)
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|