Olympus-OM
[Top] [All Lists]

Re: [OM] replace circuits

Subject: Re: [OM] replace circuits
From: PCACala@xxxxxxx
Date: Thu, 7 Jan 1999 01:32:26 EST
By the way, if anyone is interested in a used OM-4Ti circuit board, I have a
source for a OM-4Ti carcass.  The lens mount was sheered off the camera as the
result of a drop.  The rest of the body is usable.  Contact me offline and
I'll line you up with the individual.

I also located a 16mm f/3.5 Zuiko Fisheye with wear on the front coating, but
perfectly usable.  For a purest, the front element could be replaced and one
would have a quite fine condition lens.  It was owned by a former Olympus
America employee.  It's just coming out for sale and he will initially accept
the best reasonable offer.  Same with a Recordata Back 3 and a 28mm f/2.0
Zuiko.  There are other items, too, but at camera store prices.

If anyone needs strong diopter correction lenses for the Eyecup 1, I located
some under $10 -5 and -4 lenses, along with a +2.  For collectors, there are
about two dozen plastic inserts for Hot Shoes at .95 each.  There is a TTL
Connector Type 3 NIB for $25, three NIB rubber Olympus hoods for he 35mm
f/2.8/50mm f/1.4 and 1.8, a T2 0.1 meter cord for $17, and a chrome OM1/2 MD
cap for $6.

Gary Reese
on the road in Arizona

Gary Reese
Las Vegas, NV

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz