<<The rear shoe pin on shoe 3 is for TTL contact only. The flash not firing
at
all means that other contact is not touching or is shorting. Remove shoe &
blow
hole out (ypu probably already did this).
If you try scratching the contact with something, do not press too hard cus
this
can push the contact out of the metal stamping.>>
Thanks John. I will try to clean the contacts.
Strange that it only happens with shoe3!
I will post the results.
Charles Loeven
cpl49@xxxxxxxxxxxxx
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|