Your OM-1 should work with MD2.
John
Thomas H. Hogan wrote:
> Dan:
> My OM1N MD has 2 contacts but does not work with my Motor Drive 2
> perhaps there is something wrong with it but I'm thinking that it
> might only work with the Motor Drive 1. It did work with a Winder 1
>
> My OM2S has 2 contacts and has both Frame advance and Advance to
> first frame after load.
>
> It might be helpful to list the speed or frames per second capabilities
> of the different models - I now know that the OM2S has a maximum
> rate of three frames per second. The OM4T has five frames per second.
>
> I've got a whale fluking sequence on my home page that was made
> with the OM2S at http://www.netcom.com/~flzhgn/fluking.htm
>
> Dan Lau wrote:
> >
> > Based on the replies to my question, it appears the following
> > matrix summarizes the contact points and features supported
> > by the various OM camera models:
> >
> > OM Camera | Contact | Features Supported
> > Models | Points |
> > ----------+---------+------------------------------------
> > OM-1(N) | 2 | Frame advance
> > OM-2(N) | |
> > OM-10 ?? | |
> > ----------+---------+------------------------------------
> > OM-G/20 | 3 | Frame advance
> > OM-F/30 | | Advance to first frame after load
> > OM-PC/40 | |
> > ----------+---------+------------------------------------
> > OM-2S * | 2 | Frame advance Advance to first frame after load
> > OM-3(Ti) | ? | Advance to first frame after load
> > OM-4(T(i))| ? | Power rewind
> > ----------+---------+------------------------------------
> >
> > So have I got it right? I wasn't sure about the OM-10, since
> > no one mentioned it in any replies. Also no one mentioned any
> > of the OM-77/88/... models either, I don't know if they are
> > compatible with the Winder/MD. Anyone with any corrections
> > please post. It would be good to have this information
> > captured in one of the FAQ or Guide pages as well. Thanks.
> > -Dan
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> --
> Hank Hogan --
>
> BTW, I'm looking for a job as a biological science research
> technician. If you know of anyone who might need a technician
> with my skills (see resume on my home page) please let me know.
> --
> Thomas ?Hank? Hogan
> Biologist, Photographer, Web Designer
> mailto:flzhgn@xxxxxxxxxxxxx
> http://www.netcom.com/~flzhgn/indexc.htm
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|